Dolmar PS-7310 chain size
The chain for your Dolmar PS-7310
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 72
The Dolmar PS-7310 with a 20" bar takes 3/8" pitch, .050" gauge chain with 72 drive links (Oregon D72).
Bar mount D009
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Check the chain on your saw
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Dolmar PS-7310 take?
The Dolmar PS-7310 with a 20" bar takes 3/8" pitch, .050" gauge chain with 72 drive links (Oregon D72).
What bar fits a Dolmar PS-7310?
A bar with the D009 mount, in one of these lengths: 20".
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.