Husqvarna T542i XP chain size
The chain for your Husqvarna T542i XP
Which bar is on your saw?
- Pitch
- .325"
- Gauge
- .043"
- Drive links
- 51
- Pitch
- .325"
- Gauge
- .043"
- Drive links
- 59
- Pitch
- .325"
- Gauge
- .043"
- Drive links
- 64
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Husqvarna genuine part numbers
If you prefer the maker's own parts, these are the numbers to ask for at a dealer.
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Husqvarna T542i XP take?
The Husqvarna T542i XP takes .325" pitch, .043" gauge chain. Drive links by bar length: 12" bar 51, 14" bar 59, 16" bar 64.
How many drive links is a Husqvarna T542i XP chain?
It depends on the bar: 51 on a 12" bar, 59 on a 14" bar, 64 on a 16" bar. The bar length is usually printed near the mount.
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.