Jonsered CS2234 chain size
The chain for your Jonsered CS2234
- Pitch
- 3/8" LP
- Gauge
- .050"
- Drive links
- 45
The Jonsered CS2234 with a 12" bar takes 3/8" LP pitch, .050" gauge chain with 45 drive links (Oregon S45).
Bar mount K095 or A041 or A095 or T041 or Z095
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Jonsered CS2234 take?
The Jonsered CS2234 with a 12" bar takes 3/8" LP pitch, .050" gauge chain with 45 drive links (Oregon S45).
What bar fits a Jonsered CS2234?
A bar with the K095 or A041 or A095 or T041 or Z095 mount, in one of these lengths: 12".
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.