Makita dcs9010 chain size
The chain for your Makita dcs9010
Which bar is on your saw?
Which chain is on it now?
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 68
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 72
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 56
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 60
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 64
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 68
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 72
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 84
- Pitch
- 3/8"
- Gauge
- .058"
- Drive links
- 92
Bar mount D009
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Makita dcs9010 take?
The Makita dcs9010 takes 3/8" pitch, .058" gauge chain. Drive links by bar length: 8" bar 68, 8" bar 72, 15" bar 56, 16" bar 60, 17" bar 64, 18" bar 68, 20" bar 72, 24" bar 84, 28" bar 92.
How many drive links is a Makita dcs9010 chain?
It depends on the bar: 68 on a 8" bar, 72 on a 8" bar, 56 on a 15" bar, 60 on a 16" bar, 64 on a 17" bar, 68 on a 18" bar, 72 on a 20" bar, 84 on a 24" bar, 92 on a 28" bar. The bar length is usually printed near the mount.
What bar fits a Makita dcs9010?
A bar with the D009 mount, in one of these lengths: 8", 15", 16", 17", 18", 20", 24", 28".