McCulloch ELECTRAMAC 200 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your McCulloch ELECTRAMAC 200

Which bar is on your saw?

10" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
39
  • Oregon S39
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

12" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
45
  • Oregon S45
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

14" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
50
  • Oregon S50
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

16" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
55
  • Oregon S55
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

Buy this chain

Ad

Oregon S39, 39 drive links

AmazonNo exact listing found. Search for Oregon S39 chainsaw chainSearch on AmazoneBayOREGON S39 CHAINSAW REPLACEMENT CHAIN 10" POULAN, MCCULLOCHSee it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the McCulloch ELECTRAMAC 200
Chain for each bar length
BarPitchGaugeDrive linksChain
10"3/8" LP.050"39S39
12"3/8" LP.050"45S45
14"3/8" LP.050"50S50
16"3/8" LP.050"55S55

The McCulloch ELECTRAMAC 200 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 10" bar 39, 12" bar 45, 14" bar 50, 16" bar 55.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a McCulloch ELECTRAMAC 200 take?

The McCulloch ELECTRAMAC 200 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 10" bar 39, 12" bar 45, 14" bar 50, 16" bar 55.

How many drive links is a McCulloch ELECTRAMAC 200 chain?

It depends on the bar: 39 on a 10" bar, 45 on a 12" bar, 50 on a 14" bar, 55 on a 16" bar. The bar length is usually printed near the mount.

Can I use a chain with the same length but different pitch?

No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.

Other saws with the same chain

All saws that take S39 All saws that take S45 All saws that take S50

Related McCulloch saws

Every McCulloch model