McCulloch MACCAT SUPER 340 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your McCulloch MACCAT SUPER 340

Which bar is on your saw?

12" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
44
  • Oregon S44
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

14" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
49
  • Oregon S49
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

16" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
54
  • Oregon S54
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

18" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
60
  • Oregon S60
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

Buy this chain

Ad

Oregon S44, 44 drive links

AmazonPANZHENG Chainsaw Chain for 12-Inch Bars, S44, 3/8" LP Pitch - .050" Gauge - 44 Drive Links, fits Oregon, Stihl, Husqvarna, Echo, Homelite, Poulan, Worx, Chicago（3-Pack）See it on AmazoneBayOregon S44 AdvanceCut Chainsaw Chain 12" Bar 3/8" LP .050 Gauge 44 DLSee it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the McCulloch MACCAT SUPER 340
Chain for each bar length
BarPitchGaugeDrive linksChain
12"3/8" LP.050"44S44
14"3/8" LP.050"49S49
16"3/8" LP.050"54S54
18"3/8" LP.050"60S60

The McCulloch MACCAT SUPER 340 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 44, 14" bar 49, 16" bar 54, 18" bar 60.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a McCulloch MACCAT SUPER 340 take?

The McCulloch MACCAT SUPER 340 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 44, 14" bar 49, 16" bar 54, 18" bar 60.

How many drive links is a McCulloch MACCAT SUPER 340 chain?

It depends on the bar: 44 on a 12" bar, 49 on a 14" bar, 54 on a 16" bar, 60 on a 18" bar. The bar length is usually printed near the mount.

Can I use a chain with the same length but different pitch?

No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.

Other saws with the same chain

All saws that take S44 All saws that take S49 All saws that take S54

Related McCulloch saws

Every McCulloch model