Partner R16 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your Partner R16

Which bar is on your saw?

16" bar

Pitch
3/8"
Gauge
.050"
Drive links
60
  • Oregon D60
  • Same as Stihl 33RS3, Husqvarna H80
  • File 7/32"

18" bar

Pitch
3/8"
Gauge
.050"
Drive links
68
  • Oregon D68
  • Same as Stihl 33RS3, Husqvarna H80
  • File 7/32"

20" bar

Pitch
3/8"
Gauge
.050"
Drive links
72
  • Oregon D72
  • Same as Stihl 33RS3, Husqvarna H80
  • File 7/32"

Bar mount D009 or K095

Buy this chain

Ad

Oregon D60, 60 drive links

AmazonNo exact listing found. Search for Oregon D60 chainsaw chainSearch on AmazoneBayOregon D60 Chainsaw Chain 16 Inch 3/8 Pitch .050 60 Drive Links ReplacementSee it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the Partner R16
Chain for each bar length
BarPitchGaugeDrive linksChain
16"3/8".050"60D60
18"3/8".050"68D68
20"3/8".050"72D72

The Partner R16 takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 16" bar 60, 18" bar 68, 20" bar 72.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Partner R16 take?

The Partner R16 takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 16" bar 60, 18" bar 68, 20" bar 72.

How many drive links is a Partner R16 chain?

It depends on the bar: 60 on a 16" bar, 68 on a 18" bar, 72 on a 20" bar. The bar length is usually printed near the mount.

What bar fits a Partner R16?

A bar with the D009 or K095 mount, in one of these lengths: 16", 18", 20".

Other saws with the same chain

All saws that take D60 All saws that take D68 All saws that take D72

Related Partner saws

Every Partner model