Poulan micro 25ps chain size
The chain for your Poulan micro 25ps
- Pitch
- 3/8" LP
- Gauge
- .050"
- Drive links
- 52
The Poulan micro 25ps with a 14" bar takes 3/8" LP pitch, .050" gauge chain with 52 drive links.
Bar mount A041 or T041
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Check the chain on your saw
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Poulan micro 25ps take?
The Poulan micro 25ps with a 14" bar takes 3/8" LP pitch, .050" gauge chain with 52 drive links.
What bar fits a Poulan micro 25ps?
A bar with the A041 or T041 mount, in one of these lengths: 14".
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.