Stihl MS 151 T C-E chain size
The chain for your Stihl MS 151 T C-E
Which bar is on your saw?
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 44
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 50
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 55
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Stihl genuine part numbers
If you prefer the maker's own parts, these are the numbers to ask for at a dealer.
| Bar | Chain part no. | Bar part no. | Pitch / gauge | Drive links |
|---|---|---|---|---|
| 12" | 63 PM3 44 | 3005 000 4805 | 3/8" / .050" | 44 |
| 14" | 63 PM3 50 | 3005 000 4809, 3005 000 7409 | 3/8" / .050" | 50 |
| 16" | 63 PM3 55 | 3005 008 4813 | 3/8" / .050" | 55 |
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Stihl MS 151 T C-E take?
The Stihl MS 151 T C-E takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 12" bar 44, 14" bar 50, 16" bar 55.
How many drive links is a Stihl MS 151 T C-E chain?
It depends on the bar: 44 on a 12" bar, 50 on a 14" bar, 55 on a 16" bar. The bar length is usually printed near the mount.
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.