Tanaka evc4501 chain size
The chain for your Tanaka evc4501
- Pitch
- .325"
- Gauge
- .050"
- Drive links
- Count themdepends on your bar
The Tanaka evc4501 takes .325" pitch, .050" gauge chain. The length depends on the bar you run: count the drive links on your old chain, it takes a minute.
Buy this chain
Ad.325 pitch, .050 gauge: pick the drive link count of your bar
AmazonNo exact listing found. Search for .325 pitch .050 gauge chainsaw chainSearch on AmazoneBayNo exact listing found. Search for .325 pitch .050 gauge chainsaw chainSearch on eBay
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check the chain on your saw
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Tanaka evc4501 take?
.325" pitch, .050" gauge. Count the drive links on your old chain for the length.
How do I count drive links?
Lay the chain flat, mark one of the tabs underneath and count them all around until you are back at the mark.