Tanaka TCS33EB chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your Tanaka TCS33EB

Which bar is on your saw?

12" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
45
  • Oregon S45
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

14" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
52
  • Oregon S52
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

16" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
57
  • Oregon S57
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

18" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
62
  • Oregon S62
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

Buy this chain

Ad

Oregon S45, 45 drive links

AmazonNo exact listing found. Search for Oregon S45 chainsaw chainSearch on AmazoneBay2 Replace 12" Oregon 91PX045G S45 Chainsaw Chain 3/8"LP Pitch .050" Gauge 45DLSee it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the Tanaka TCS33EB
Chain for each bar length
BarPitchGaugeDrive linksChain
12"3/8" LP.050"45S45
14"3/8" LP.050"52S52
16"3/8" LP.050"57S57
18"3/8" LP.050"62S62

The Tanaka TCS33EB takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 45, 14" bar 52, 16" bar 57, 18" bar 62.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Tanaka TCS33EB take?

The Tanaka TCS33EB takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 45, 14" bar 52, 16" bar 57, 18" bar 62.

How many drive links is a Tanaka TCS33EB chain?

It depends on the bar: 45 on a 12" bar, 52 on a 14" bar, 57 on a 16" bar, 62 on a 18" bar. The bar length is usually printed near the mount.

Can I use a chain with the same length but different pitch?

No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.

Other saws with the same chain

All saws that take S45 All saws that take S52 All saws that take S57

Related Tanaka saws

Every Tanaka model